Gylon® 3500

Style 3500 - Fawn
PTFE with silica filler

ASTM F104: F451999A9B1E99K6M6

Garlock GYLON ® is truly a superior and unique material. The exclusive properties of GYLON ® are combined to deliver its superior performance to comply with today’s clean air requirements through sealability and torque retention.  Asbestos-free GYLON ® gasket materials routinely out-performs all conventional PTFE products by drastically minimizing gasket creep and cold flow problems.

 
 

quote

 

Application
GARLOCK® 3500 is premium grade compressed sheet gasket material that is excellent in strong acids except hydrofluoric, solvents, hydrocarbons, water, steam, chlorine, and cryogenics, Conforms to FDA regulations. For oxygen service, specify "Style 3502 for oxygen service.").

Tighter Seal
Improved performance over conventional PTFE. Reduced product loss and emissions.

Reduced creep relaxation
Unique manufacturing process minimizes cold flow problems typical of skived and expanded PTFE sheets

Chemical resistance
Withstands a wide range of chemical for extended service life in a wide variety of applications.

Cost savings
Cuts operational cost through reduced Fluid Loss, Energy Comsuption, Maintenance Costs, Inventory Costs and Waste.

Largest Sheet Sizes*
Offers some of the largest sheet sizes in the industry. Improved material utilization reduces waste.

Branding and color coding
Easy identification of superior GYLON products. Reduces misapplication and use of unauthorized, inferior substitutes.

Available Sheet Sizes:

Nominal Thickness
Sheets Sizes
Order Code
Sheets per Roll
Weight / Sheet lbs (kg)
Inchesmm
1/64" (0.4 mm)
60 x 60 1524 x 152435014-6601
 4.7
1/32" (0.8 mm)60 x 601524 x 152435014-6602 9.4
1/16" (1.5mm)60 x 60
60 x 90
70 x 70
1524 x 1524
1524 x 2286
1778 x 1778
35014-6604
35014-6904
35014-6604
 18.8
28.2
25.6
1/8" (3.0 mm)60 x 60
60 x 90
70 x 70
1524 x 1524
1524 x 2286
1778 x 1778
35014-6608
35014-6908
35014-7704
 37.5
56.3
51.0
1/4" (6.0 mm)60 x 601524 x 152435014-6616 75.0

Warning: Durlon gasket materials should never be recommended when both the temperature and the pressure are at the maximums listed. Properties and applications shown are typical. No application should be undertaken by anyone without independent study and evaluation for suitability. Never use more than one gasket in one flange joint, and never reuse a gasket. Improper use or gasket selection could cause property damage and/or serious personal injury. The data reported is a compilation of field testing, field service reports and/or in-house testing. While the utmost care has gone into publishing the information contained herein, we assume no responsibility for errors.


M&Y and Proposed ASTM Gasket Constants:

Thickness1/16"
1/8"
 M 5.05.0
Y psi (MPa)
 2750 3500
Gasket Constants   
Gb psi (MPa)9491980
a
0.2530.169
Gs psi (MPa)2.60E+003.93E-01

*Gasket Constants based on proposed ASTM Draft 10.01


Typical Properties:

Color:Fawn with Blue Brand
Fluid Service:Strong acids (exception: hydrofluoric), solvents, hydrocarbons, water, steam, chlorine
Temperature:
min. -450°F (-268°C) to max. +500°F (+260° C)†
Pressure, max:1200 psig (83 bar)
P x T, max:350,000 (12,000)* (1/32" and 1/16")
250,000 (8,600)* (1/8")
Note: This general purpose GYLON ® gasket material has a significant advantage over conventional PTFE in regard to its functionability at higher temperature/ pressure combinations. Often used in chemical processing and hydrocarbon processing industries. Conforms to FDA regulations.
Note: When Fawn GYLON ® gasket material is required for oxygen service, specify “Style 3502 for oxygen service.”
† when approaching maximum temperature, consult your sales representative
* P x T max. = psi x °F (BAR x °C)

Typical Properties:

ASTM TestPhysical Properties3500 (Fawn)3504 (Blue)
3510 (Off White)
F37B
Sealability
Milliliters/hr. leakage
ASTM Fuel A (isooctane)
Gasket Load: 1000 psi (7 N/mm2)
Internal Pressure: 9.8 psi (.7 BAR)
0.22
0.12
0.04
F38
Creep Relaxation, %
18
40
11
F36
Compressibility, Range, %
7-12
25-45
4-10
F36
Recovery, %
40
30
40
D1708
Tensile Strength, psi (N/mm2)
2000 (14)
2000 (14)
2000 (14)
D1708
Modulus at 100% elongation, psi (N/mm2)
1600 (11)
1500 (10)
1400 (9)
D792Specific Gravity
2.10
1.70
2.80
D149
Dielectric Strength, V/Mil
500
305
577
F433
Thermal Conductivity (k),
Btu. in. / hr. ft.2 °F
2.88
1.44
2.40
Flammability:
 Will Not Burn
Will Not Burn
Will Not Burn
Bacterial Growth:
 Will Not Support
Will Not Support
Will Not Support
 

register.jpg